Recent Articles



































Golf club (equipment)



         


Golf is played with golf clubs of various types. There are three major categories of clubs, known as woods, irons, and putters. Wedges resemble irons and may also be counted among these. A golfer is allowed to carry up to fourteen clubs during a round.

While it is possible to play a range of different shots using only one club, modifying only the speed and direction of swing, this is not a particularly successful technique. Far easier is it to keep the swing as constant as possible and achieve different lengths and characteristics of ball flight using a different club for each shot. To facilitate the choice of a club for any particular situation, all irons (and many woods and wedges) come in sets of similar clubs graded by loft (see below), shaft length, and weight. Clubs are numbered for identification with the smallest numbers indicating the lowest loft.

Various clubs are designed with the face having differing loft (the angle between a vertical plane and the clubface when the club is at rest). Perhaps with the exception of tee shots, it is loft that makes a golf ball leave the ground, not an upward direction of swing: for some shots with a particularly high trajectory such as pitches, the club actually hits the ball in a downward motion, and with most other shots the motion is more or less horizontal. Typically, the greater the loft, the higher and shorter the resulting ball trajectory.

A typical set of clubs may consist of irons 3 to 9, three wedges, woods 1, 3, and 5, and a putter.

[Top]

Types

[Top]

Construction

The parts of a club are the shaft (with grip) and the head. The shaft is a tapered tube made of metal, fiberglass, or graphite fiber. The shaft is roughly 1/2 inch in diameter (12 mm) near the grip and between 35 to 45 inches (89-115 cm) in length. The end of the shaft opposite the head is covered with a rubber or leather grip for the player to hold. The head is the part that hits the ball. Each head has a face which contacts the ball during the stroke (but the head of a putter may have two faces).

Traditionally, most metal golf club heads were made by forging, which involves the careful shaping of the club head through hammering and pressing of heated steel. Today, most modern golf club heads are cast. are still prized for feel while cast clubs often have modern game improvement characterists.

[Top]

Regulations

The ruling authorities of golf, the Royal and Ancient Golf Club of St Andrews (R&A) and the United States Golf Association (USGA) reserve the right to define what shapes and physical characteristics of clubs are permissible in tournament play. Several recently developed woods have a marked "spring-like effect" (i.e. a strong rebound of the ball from the clubface) resulting in very high ball speeds and great lengths of tee shots. Current USGA and R&A regulations differ with respect to acceptable limits of the "spring-like effect". Therefore, a few club types may not be played in tournament or professional play under USGA jurisdiction, but are allowed elsewhere.






  View Live Article   This article is from Wikipedia. All text is available under the terms of the GNU Free Documentation License